{"id":8936,"date":"2021-01-09T14:13:03","date_gmt":"2021-01-09T14:13:03","guid":{"rendered":"https:\/\/resin-expert.com\/?p=8936"},"modified":"2024-06-04T12:37:41","modified_gmt":"2024-06-04T12:37:41","slug":"painting-on-resin","status":"publish","type":"post","link":"https:\/\/resin-expert.com\/en\/guide\/painting-on-resin","title":{"rendered":"Painting on Resin – Tutorial on How you can Paint Resin properly"},"content":{"rendered":"

Painting resin is a totally different experience to traditional painting surfaces – such as canvas or paper. The big difference is that resin is incredibly smooth which makes it difficult for paint to stick firmly to its surface. If you are interested in painting on resin, then be sure to check out the following guide for some useful tricks to help get a great finish.<\/strong><\/p>\n

 <\/p>\n\n

 <\/p>\n

\n

Painting Resin<\/h2>\n

Painting on resin is no easy task to get right. However, the smooth and unique surface for painting does allow you to achieve some creative and fun new effects. A beneficial technique when painting on resin is that wet paint can be easily wiped away, and dried paint can be scraped off without any problems. This gives you more room for experimenting and getting things just the way you want them.<\/p>\n

\"how<\/p>\n

 <\/p>\n

 <\/p>\n

How to Paint Resin: Step-by-Step Guide<\/h2>\n

When you paint resin, the process is different from painting on traditional surfaces like a canvas. For this reason, a few critical steps need to be followed in order to make sure you get good results. This starts by preparing the resin surface properly and then using the right type of paint<\/a><\/strong> for the project.<\/p>\n

 <\/p>\n

Cleaning the Resin<\/h3>\n

The first thing to do is to make sure that the surface of the resin is clean. Sometimes, there will be some dirt or residue remaining from the casting process. Using warm soapy water, you can clean up the resin pretty easily. Make sure that it is completely dirt and dust-free before proceeding.<\/p>\n

 <\/p>\n

Sanding<\/h3>\n

When the resin is cast, flash can occur. This is when some pieces of dried resin can find a place between the halves of a mold. When this happens you often don’t notice it, but it is easily spotted when painting on resin. Flash can be removed with a craft knife, and the resin surface should be sanded down completely. The smoother and more even the resin is the better.<\/p>\n

\"painting<\/p>\n

 <\/p>\n

Fill in Holes<\/h3>\n

If there are any imperfections in the resin that occurred during the casting process – such as air bubbles or holes, these will need to be filled in. Epoxy putty<\/a><\/strong> can be used to do this, as it will bond well with the resin. Once cured and filled in, you can sand down the putty to achieve a perfectly smooth and even surface.<\/p>\n

 <\/p>\n

Priming<\/h3>\n

Once the surface is smooth, clean, sanded, and ready, you will have to apply a layer of primer. This is necessary for painting on resin, as the resin is such a smooth surface. Without a primer, the paint will not be able to adhere very well to the resin. Making sure that the primer is on properly is one of the most important steps when you paint resin models.<\/p>\n

 <\/p>\n

You can get primers in various colors. This should be chosen depending on the color you will be painting with. Light colors are best with a light primer, dark colors work with a dark primer, and so on. Usually, white or grey primers are preferred as these work with most paint colors.<\/p>\n

\"paint<\/p>\n

 <\/p>\n

Primers can come in a spray or brush-on form. Spray on primers are best, as these allow you to get a perfectly even coating. They are also good for getting into any details and hard to reach places. Spraying on the primer offers you more control and results in a smoother finish compared to brushing it on.<\/p>\n

Primers should be sprayed in a well-ventilated area as they can cause some fumes in the air. You will probably need a few layers of primer depending on the particular conditions. Just make sure that each coat is dried properly before a new layer of primer is added. Many people will and the primer between coats for a stronger finish.<\/strong><\/span><\/p><\/blockquote>\n

 <\/p>\n

Best Primer to Use: KRYLON ColorMaster Paint and Primer<\/h4>\n

If you are after the best primer for painting on resin, we would have to recommend this option by Krylon. This versatile primer is available in various colors, and so it can work well for all kinds of projects. This is also a spray primer which makes it a smarter choice for using over resin surfaces. This is a fast-drying primer which makes it easier to add multiple layers. It will help to smooth out uneven surfaces and increase the adhesion properties of any surfaces. If you are going to paint resin models, this primer will provide a major help.<\/p>\n